ARE THERE ANY MORE QUESTIONS?
If you have any other questions, please feel free to contact us at any time.
Hitching and unhitching a trailer alone used to mean crawling under the tongue, stacking blocks and hoping for the best. A good tongue jack turns that into a one-minute job.
Fast delivery
Quality Assurance
24/7 Customer Service
This side-wind trailer jack lifts up to 2,000 lbs of tongue weight — enough for pop-up campers, utility trailers, small boat trailers and lawn-care haulers. The side-mounted crank lets you raise or lower the coupler standing comfortably beside the trailer, while the spring-loaded drop leg slides out and locks into five positions for quick height changes without cranking. A wide steel foot plate spreads the load so it won't sink into grass, mud or gravel.
Bolt it onto your A-frame or straight tongue — no welding, no specialist tools. When you're ready to tow, swivel it up and out of the way so it won't bottom out on driveways or boat ramps. Black paint over steel means it survives outdoor storage without turning into a rusty mess by season two.
Item | Spec |
Product Type | Trailer Tongue Jack (Side Wind) |
Lift Capacity | 2,000 lbs (907 kg) |
Retracted Height | 13" (330 mm) |
Extended Height | 23" (584 mm) |
Travel | 10" (254 mm) |
Drop Leg Positions | 5 adjustable holes |
Crank Style | Side wind, padded grip handle |
Mounting | Bolt-on bracket |
Foot Plate | Welded flat steel plate |
Material | Steel tubing |
Finish | Black paint |
Net Weight | Approx. 10 lbs (4.5 kg) |
Application | Utility, boat, camping, pop-up trailers |
supports the tongue weight of pop-ups, utility, boat and camping trailers
13" retracted / 23" extended, fits a wide range of trailer frames
easy to crank standing next to the trailer, no reaching under the tongue
quickly extends for extra height without cranking, then locks in 5 positions
installs on A-frame or straight tongues with basic tools
distributes load on dirt, gravel and pavement, won't sink in soft ground
corrosion resistant for outdoor trailer storage
Rated for 2,000 lbs of tongue weight. Note: this supports the trailer when parked — it does not lift the whole trailer off the ground.
13" retracted to 23" extended, giving 10" of vertical adjustment.
The drop leg slides out and locks into five positions for quick height changes — handy when you need to set the trailer height on uneven ground without cranking.
It bolts onto an A-frame or straight trailer tongue with the included mounting bracket. No welding required.
No. Always retract or swivel the jack up before towing to avoid hitting the ground on ramps or bumps.
Side wind — the crank handle is on the side, so you crank standing next to the trailer.
Pop-up campers, utility/landscape trailers, small boat trailers, jet ski trailers and lawn-care trailers.
The wide steel foot spreads the load. On very soft grass or mud, use a pad or board under the foot.
No. This is a 2,000 lbs class jack. Full-size travel trailers need a 3,500 lbs or 5,000 lbs electric or swivel jack.
The crank handle folds to the side for storage; some customers remove it for security.
If you have any other questions, please feel free to contact us at any time.
If you have any questions or needs about the product, please fill in the following form and we wll contact you as soon as possible.