ARE THERE ANY MORE QUESTIONS?
If you have any other questions, please feel free to contact us at any time.
Boat trailers live the hardest life of any trailer: dunked in saltwater, parked in the sun, covered in mud and lake muck. A painted black jack doesn't last a season in that environment. This galvanized swivel jack does.
Fast delivery
Quality Assurance
24/7 Customer Service
The square-tube body is hot-dip galvanized, so salt spray, freshwater muck and winter road salt can't rust it out. At 3,000 lbs lift capacity it handles heavier single-axle boat trailers, jet ski trailers and light horse trailers that a 2,000 lbs jack can't stabilize. A side-wind crank raises the coupler for hitching, while the pin-adjustable drop leg — chained to the main body so it can't drop on your foot — sets the working height in seconds.
Everything you need to install is in the box: two mounting plates and four grade-8 bolts. Bolt it to your A-frame or straight tongue, swivel it up before towing, and rinse it off after a day at the ramp. It's the support jack that keeps working when everything else around it is rusting.
Spec | Value |
Product Type | Swivel Trailer Tongue Jack (Side Wind) |
Lift Capacity | 3,000-8000 lbs |
Travel | Approx. 10" lift |
Drop Leg | Pin-adjustable, with safety chain |
Crank Style | Side wind, padded grip |
Mounting | Swivel bracket, bolt-on |
Mounting Hardware | 2 plates + 4 bolts & nuts included |
Foot Plate | Welded steel, wide base |
Body Material | Square steel tube |
Finish | Hot-dip galvanized (silver) |
Net Weight | Approx. 14 lbs (6.4 kg) |
Application | Boat, marine, utility, cargo, horse trailers |
steps up from light-duty jacks for heavier boat, cargo and horse trailers
built to survive saltwater launching, marine docks and winter storage
stiffer and more rigid than round-tube jacks, less wobble when parked
raise and lower the coupler from beside the trailer
pin-adjustable extension stays attached, never drops on your foot
spreads load on ramps, boat launches and soft trailer yards
releases and swings up out of the way for travel
3,000 lbs of tongue weight — enough for most single-axle boat, cargo and light horse trailers.
Galvanized zinc coating is built for marine and outdoor use. It shrugs off salt spray that would rust a painted jack in one season.
Two mounting plates and four grade-8 bolts with nuts — everything you need to bolt it on.
Three things: (1) galvanized finish for corrosion resistance, (2) square-tube body for rigidity, (3) swivel-up bracket that swings out of the way for travel.
Yes — that's exactly what it's built for. Rinse with fresh water after saltwater use.
It keeps the extension leg attached to the main body, so if the pin slips the leg won't drop free and hit the ground.
Yes — pull the release pin and swing the jack up horizontally to avoid bottoming out on ramps.
Boat and PWC trailers (especially saltwater), utility and cargo trailers, small horse trailers, landscape trailers.
Yes. The dual-bolt mounting plate fits most A-frame and straight tongue setups.
Approx. 10" of lift travel plus the drop-leg extension. Compare to your current jack's height before ordering.
If you have any other questions, please feel free to contact us at any time.
If you have any questions or needs about the product, please fill in the following form and we wll contact you as soon as possible.