ARE THERE ANY MORE QUESTIONS?
If you have any other questions, please feel free to contact us at any time.
This weld-on hitch receiver extension tube is engineered for builders facing common clearance headaches when fitting towing gear. If your original hitch position is blocked by spare tires, rear bumpers or body panels, this extended square sleeve offers a simple, solid solution to push your tow point outward.
Fast delivery
Quality Assurance
24/7 Customer Service
It adopts the widely used 2-inch square inner dimension to match nearly all standard ball mounts, hitch pins and towing accessories on the market. The elongated body adds necessary offset distance, while the heavy-gauge steel wall keeps the whole assembly rigid during hauling. The pin hole is pre-drilled for precise alignment, so your locking pin seats properly and eliminates unwanted wobble.
Black powder coating is applied over the whole surface. Compared with ordinary paint, this coating resists chipping from gravel impact and slows rust formation when exposed to rain, snow and road salt. Its straight, smooth inner bore keeps sliding action consistent even after repeated use.
Designed exclusively for weld-in fabrication, this extension sleeve is a go-to component for custom truck hitches, off-road trailer builds and farm tow setups. It gives you the freedom to adjust your towing point position without cutting or reworking your main frame extensively.
Item | Spec |
Product Name | Weld-On Hitch Receiver Extension Tube |
Inner Size | Standard 2 inch square |
Material | Heavy Gauge Carbon Steel |
Surface Finish | Black Powder Coated |
Installation Type | Weld-on |
Feature | Extended Length, Pre-drilled Pin Hole, Stop Flange |
Application | Truck, Off-Road, Trailer Custom Fabrication |
Function | Add Clearance for Spare Tire / Bumper Avoidance |
Service | OEM Custom Length & Hole Layout Available |
It adds extra outward clearance, to prevent ball mounts from hitting spare tires, bumpers or other vehicle parts.
Yes, it accepts any standard 2" x 2" shank ball mount that works with regular 2-inch receivers.
This is a weld-only component. Bolted installation cannot meet towing safety requirements and is not recommended.
Extended length creates more leverage. Your overall towing rating depends on frame strength, welding quality and full hitch assembly.
Standard hole position as shown. Custom hole positions and lengths are supported for bulk OEM orders.
No, hardware and ball mounts are sold separately. You can pick matching parts from our hitch accessory range.
The coating at welding areas will burn off. After cooling, touch-up paint can be used to restore anti-rust protection.
The steel itself is heavy duty, but proper full-penetration welding and frame reinforcement are critical for off-road use.
This extended version focuses on clearance offset. The short model is used when you directly build a hitch at the frame without spacing needs.
Stacking is not safe for towing. If you need a specific offset length, we suggest ordering a custom single-piece tube.
If you have any other questions, please feel free to contact us at any time.
If you have any questions or needs about the product, please fill in the following form and we wll contact you as soon as possible.