ARE THERE ANY MORE QUESTIONS?
If you have any other questions, please feel free to contact us at any time.
Adjustable trailer jack drop leg is designed for campers and trailer owners who frequently park on uneven ground. Instead of relying on wooden blocks or extra shims for leveling, this multi-position drop leg lets you fine-tune your trailer height directly with the latch pin.
Fast delivery
Quality Assurance
24/7 Customer Service
The heavy steel tube is drilled with a series of aligned holes, offering multiple height options to compensate for slopes, dips and bumpy campsite surfaces. The wide round base plate distributes pressure across a larger contact area, greatly lowering the chance of sinking into soft mud or beach sand. The spring safety pin locks firmly into any selected hole, holding the set height securely without drifting.
Full hot-dip galvanizing protects the whole leg from corrosion by rain, dew and road salt. The smooth tubing slides neatly inside the jack sleeve, so height adjustments stay light and snag-free. The lip around the edge of the round base adds extra grip on asphalt, gravel and packed dirt.
It serves as a direct replacement or upgrade part for stabilizer jacks on caravans, campers and utility trailers. If you want simpler, safer trailer leveling without makeshift supports, this adjustable drop leg is a practical upgrade.
Item | Spec |
Product Name | Adjustable Trailer Jack Drop Leg with Round Base Foot |
Material | Carbon Steel |
Surface Finish | Hot-dip Galvanized |
Locking Hardware | Spring Quick Release Latch Pin |
Structure | Multi-hole Steel Tube + Round Anti-sink Base |
Core Advantage | Multi-height adjustable for uneven ground leveling |
Application | RV, Caravan, Utility Trailer Stabilizer Jack |
Installation | Slides into matching jack sleeve |
Service | OEM Custom Tube Diameter & Hole Layout |
It is the adjustable lower leg for stabilizer jacks, used to change support height and level trailers on uneven ground.
Yes, please confirm the outer tube diameter of this leg matches the inner size of your jack sleeve before purchase.
Multiple pre-drilled holes provide several height settings. Custom hole quantities and spacing are available for bulk orders.
Only the drop leg assembly with round base and safety pin. The jack sleeve is sold separately.
The wire-form latch creates constant spring tension to lock the pin, and it stays seated during stationary support.
The round base has no sharp corner stress points, and performs well on irregular soft ground like sand and lawn.
It is designed for static parking stabilization and leveling, not for lifting heavy loads.
Minor wear at hole contact points is normal. Galvanized steel still maintains good rust resistance for long service life.
Cutting will remove pre-drilled holes and damage the galvanized coating. We suggest ordering custom lengths for special needs.
It is widely used for RVs, caravans, boat trailers and general utility trailers with matching jack sleeve size.
If you have any other questions, please feel free to contact us at any time.
If you have any questions or needs about the product, please fill in the following form and we wll contact you as soon as possible.